How to Get Rid of Brown Well Water with a Solar Powered Water Filter

How to Get Rid of Brown Well Water with a Solar Powered Water Filter

We all know how frustrating it is to turn on your tap water to fetch a glass of water, only to be greeted by the unwelcoming brownish sight in your cup. Such discoloration could cause the water to smell, have a bad taste, or harm its drinkers. Luckily, it’s nothing a good water filter can’t fix, as the water experts would say. If you’re ready to get rid of brown well water, we’ve got some tips for you.

First Test the Water

The discoloration of the water could be a result of different factors, including rusty pipes, a high amount of iron and manganese, the presence of tannins or silts, and a muddy pump. Although these are different factors, they all have one thing in common. They turn our waters brown, and we do not like that.

Suppose you notice that your water has suddenly gone rogue and changed its color. In that case, you must first perform a water test to determine the real culprit behind the discoloration and if it is harmful to your health.

The water test thoroughly checks the water’s condition and tells you all you need to know. You will find out the parts per million (ppm), the type of iron in the water and its quantity, its pH, and dissolved oxygen.

water ph levels

After the water test has been conducted, you will know what is wrong with your water and how to purify it. The factor behind the discoloration determines the kind of water filter you must use.

Use a Water Softener System

Using a water softener system is one of the most reliable methods to get rid of brown well water, especially if the discoloration was caused by the presence of iron in the water. Water softeners are mostly used to filter hard water.

A water softener works through a process known as Iron Exchange, which aims to eliminate sodium magnesium from the water. Once installed and connected to your water’s mainline, the water softener goes straight to work by removing the iron from your water. It also removes resin from the water (if they are present in small amounts).

This clears up the brownish color and makes the water fit for consumption once again. The water softener system is economical since it does not cost too much to purchase and install.

Use Solar Power to Filter Water

Using solar power to purify drinking water is not that uncommon anymore and the way to go for a sustainable future. Let’s take a look at how this solar water filter system works:

Use an Iron Filter

If you are not comfortable with the idea of installing a water softener system, an Iron filter is another great way to get rid of brown well easily. The iron filter is great for hard water within the range of 6.5 to 8 pH.

The iron filter works by taking the oxidized ferrous irons and converting them to ferric-iron particles, which can then be flushed to remove the built-up iron particles.

When using an iron filter to get rid of brown well water, you can either use air aspirated filters or carbon filters. The air aspirated filters usually convert ferrous iron into ferric iron by introducing more oxygen to the water. On the other hand, carbon filters are used to eliminate unpleasant odors or chlorine tastes in the water.

Remove the Rust

rusty water pipe

Rusted pipes are a common reason for brown well water in many households. If during inspection you find that your pipes are rusted, you must replace them immediately. To know which pipes need replacement, simply check the pipes that are bringing out the brown water. Sometimes, the cause of the brown water may not be from the pipe but from a rusted water heater. If this is the case, you must properly clean the water heater or get a new one.

Use the Air Injection Oxidization Method

This filtration method is used for particular filtration purposes. These kinds of water filters are known to treat contaminated waters by introducing oxygen to the water source. This will lead to the oxidization of iron and manganese in the water. Once oxidized, the particles would stick to the media bed, which will regenerate and flush out all impurities. This treatment, however, is best when the discoloration of the water is caused by the presence of iron.

Use Greensand Filters

These kinds of water filters are usually coated with manganese oxide. These chemicals act like injection filters and are used to oxidize iron and manganese, turning them into solids. The solidified particles (impurities) will then stick to the media bed and be washed away. Unlike the air oxidization process, which automatically flushes out the impurities, greens and filters are manually washed and replaced.

Reverse Osmosis

This water filtration system is a highly effective method that easily removes most organic materials/impurities from the water. Usually, the reverse osmosis system is installed before the water heater to ensure that only clean water enters the house. They can also be installed at the kitchen sink or any other point in the building.

The reverse osmosis system has different filtration stages. The water will flow until it finally reaches the reverse osmosis membrane. At this stage, all forms of impurities are removed from the water, leaving it clean and ready for use.

Leave a Reply

Your email address will not be published.